|
|
Post by bb350yj on Feb 6, 2008 17:05:46 GMT -7
Was just wondering if I will be able to reach 70mph in any ones opinion. I just sent in my head & cylinder for porting and milling and reshape. Ill have a 20mm carb, boyseen reeds, 2nd over piston,alm. wheels w/irc, premix, hot wire, right fork spring, fork brace, top clamp, and all new bushings and wheel bearings.
|
|
|
|
Post by bb350yj on Feb 6, 2008 17:12:45 GMT -7
I also have toomey pipe and a new clutch
|
|
|
|
Post by airdreams1 on Feb 6, 2008 22:41:30 GMT -7
Its a possibility. Just wont be able to do so for very long. It will be producing more heat.........
|
|
|
|
Post by bb350yj on Feb 7, 2008 8:45:59 GMT -7
Thanks, I was just wondering. Ill be happy to cruise 55-60 with out a problem
|
|
|
|
Post by airdreams1 on Feb 7, 2008 10:47:45 GMT -7
unfortunatly the head mod makes the motor create more heat. (more heat + less reliablity) Id reccomend you get a temp gage & watch it.
|
|
|
|
Post by bb350yj on Feb 7, 2008 10:51:31 GMT -7
would it help to run a diffrent plug ?
|
|
|
|
Post by ysrcali on Feb 8, 2008 6:12:49 GMT -7
"unfortunatly the head mod makes the motor create more heat. (more heat + less reliablity) Id reccomend you get a temp gage & watch it. "
Lance is correct. These mods (porting & head work) are great for a race track, but for street, it's not necessary.
Just don't hold it pinned for long periods of time. Back off the throttle from time to time or take frequent breaks to cool the motor down (5 min at a time). Your motor will thank you for it, and will last a bit longer.
Btw, your piston & cyclinder, do your best to keep it bored within Yami specs, not Weisco.
|
|
|
|
Post by bb350yj on Feb 9, 2008 7:29:25 GMT -7
Calamari is doing the motor work. I asked the gal there about the heat and she said it would not be a problem, but i guess ill find out. Thanks for your input.
|
|
