|
|
Post by fizzedout on Oct 19, 2006 22:59:06 GMT -7
Just wondering if anyones played around with sprocket sizes with stock ysr. Was thinking of dropping one tooth in the rear.
|
|
|
|
Post by airdreams1 on Oct 20, 2006 21:36:03 GMT -7
If everything is stock;
You will loose a minute amount power on the take off & gain maby 1 mph. Not enough to waste the $. Just my opinion.
If you go with a 13 tooth front, it will be more noticeable difrance.
|
|
|
|
Post by flaysr50 on Jun 14, 2007 19:52:14 GMT -7
Not sure how large of a guy you are but my YSR gearing was a 14-44 and it went pretty good. but you might need that 13.
|
|
|
|
Post by airdreams1 on Jun 18, 2007 10:09:34 GMT -7
Yes, 13 would probably be would be the best. Expecialy if his bike is bone stock.
Since stock is 12 - 44, to only drop 1 tooth in the rear would be almost pointless.
|
|
