Joined: Jul 2006 Gender: Male Posts: 258 Location: ID Karma: 1,002
YSR Parts for sale or trade. « Thread Started on Aug 2, 2006, 2:11am »
Ill be going through all my parts again & adding to the listn.... may even sell a set of my douglas wheels.
All for sale or trade:
Stock Seat ~ In Ok condition look at the pics. (has some small cracks at the corners & 4 small holes drilled by the taillight hole. NO battery door)
Stock Upper ~ in usable condition (had ear broken off, but was half assed repaired, has some cracks around the signal mounts & 1 mounting hole.)
Have a first generation set of YSR50.COM body work includes the Upper, lower, & tail. (does have a couple extra holes drilled in the lower. As I have started trying to mount it. It also has extra holes in the seat pan that can be easily filled. I could glass them in if you realy wanted them filled & dont know how to do it.) These first generation body kits were rougher than the newer ones so they need to be sanded & painted to look good. Pic of the tail just sitting on the bike, but doesnt have the tail light at this time (my friend is trying to re wire it again for 6 volt. for some reason it just quit working. I can get it back or wate to see if he gets around to fixing it.. It will still run 12 volt & he may get it fixed again so it will run 6 volt.) Pic of it on the bike (the front fender does NOT come with it)
RX50 motor parts:
left case half right case half Have most of the innerds (no shift drum thats the part Im pointing at)
(1 on hold) rear shocks (stock) 1 red 1 yellow
(1 set on hold) stock head & cylender (still on stock bore, I think it needs to be bored to first over since it has some scratching although I cant feel it with my fingernail)
(1 set on hold) ~have another stock head & cylender as well & will get pics up asap. its on stock bore as well & will probably need bored to the first over.
(on hold)Stock wheel (painted white, no hub)
vinal seat covers (no holes or tares. just stapel on with a staple gun.)
(on hold)kickstand
turnsignal relays (both work)
Speedo drive gear.
Speedos (good condition, just dont have the pigtail with bulbs. Ive lost them.)
3 foam dash pads good condition (no tares)
Airbox (opened for more air flow.)
Turnsignal - stock (has some gold paint that can be removed.)
brake hub cover
Make an offer OR Let me know if you have any parts from my "needed" list
airdreams1@yahoo.com ------------------------------------------------------------------------------------------------------------ YSR PARTS I NEED! Batery strap, stator plate & coils, ????
Preformance parts: alum clip-ons, alum tripple clamp, nology hot wire, etc.